Tarot ZYX-M Ground Station

타롯사의 ZYX-M 플라이트 컨트롤러용 그라운드 스테이션 세트.

<주요 기능>

- 자동 이착륙 및 웨이포인트, 인텔리전트 리턴 기능

- 4가지 모드의 팔로우 업 기능 제공

- 3가지 네비게이션 기능 제공

주의 : ZYX-M Ground Station은 Android OS 4.3 이후 버젼만 지원됩니다.

주의 : 본 제품은 구매대행 상품으로서 매장내에는 재고가 없으므로 매장 재고 문의는 받지 않습니다.

Tarot introduced the ZYX-BD 2.4G Bluetooth digital transmission module, the number of measured reception distance of up to 1.5 km, is a special supporting ZYX-M flight control system research and development, exclusive ground station APP software for the aircraft to carry out over-the-horizon flight control design, ZYX-M to enjoy your stable flight on the basis of the liberation of your remote control of the cumbersome control, touch screen click, along with the flight control experience in a "point" between.

<Product Features>
Tarot APP provides a user-friendly interface design, support both Chinese and English, support two map orientation, support real-time power display, real-time flight attitude feedback, allowing users to know the flight status. Can be based on real-time flight needs, set the editing route, over the distance from the flight, the mission will be up!

◆ support a key to take off & landing, to provide three return points set, intelligent return, novice can also be free to fly;
 

◆ provide four follow-up mode for your careful capture of the figure;
 

◆ provide three navigation modes, convenient and intuitive and re-editing, so that your route settings more accurate and more simple!

note:
The use of Tarot Technology APP to meet the following conditions: Android OS 4.3 version and above and Bluetooth 4.0 (iOS system later launched);
Mobile phone with the ground side of the number of modules maintained in the range of 0.5 meters to keep the signal stable;
ZYX-BD Bluetooth digital transmission must be used with the ZYX-M flight control system.

Product specifications
Tarot 2.4G Bluetooth digital ground equipment (58.78 × 49 × 18.4mm 43.2g) × 1
Tarot 2.4G Bluetooth Digital Sky Equipment (40 × 20.3 × 1.1mm 5.6g) × 1
Tarot 5.8G Antenna × 1 (115.5mm 9.9g)
Sky-side equipment connection ZYX-M flight control wiring × 1
Charge the Mirco-USB data cable (not included, ZYX-M flight included)

<제품 이미지>

<제품 이미지>

Product Description:
Light weight, mini size.
Specific for long distance AV transmission.
Applicable to most 5.8G transmitters with 8-32 channels
1 Video output + 2 Audio output
Equipped with 5V1A power output; please confirm the current and voltage of relative device.

Note:
Install the antenna before connecting the power to avoid further damage.
Choose proper working frequency and tune the receiver to the same frequency. Please refer to the channel list.
Do not touch the surface of transmitter while operating. It is normal the surface is getting hot.
The input voltage range is between 7-26V (2-6S), do not overload the working voltage.
The output voltage is 5V1A. Please confirm the current and voltage of the camera
Applicable to DJI Phantom, 450-550 class Quad-copter, and Hex-copter

Specification:
TX5832-600M AV TX x1
 

TX5832-600M Specifications:
Weight: 8.3G (without antenna)
Dimension: 21 x 33 x 7.5 mm
Working Frequency: 5645-5945MHz
Channel: 4 bands / 32 channel
5-DIP switch
Output Power: 27.5 dbm (600mw)
Input Voltage: DC 7-26V (2-6S)
Output Voltage: 5V 1A
Antenna Adaptor: RP-SMA 50Ω
Working Temperature: -10 ~ 60 degrees.
FM Frequency: FM