Tarot FPV TX Module Only + TX Antenna(1,000mW)

타롯사의 중, 대형, 멀티콥터용 FPV TX 모듈 및 클로버 안테나 세트.

총 32ch 구성이며, 최대 입력전압은 2S~6S(7.4V~26V)까지 가능하며, 자체 레귤레이터를 내장, 5V/1A 출력까지 겸비하고 있습니다.

원활한 방열을 위해 Metal Hard Case가 장착된 신형 버젼입니다.

본 상품은 구매대행 상품이며 매장 재고 문의 등은 받지 않으므로 이점 양지말씀 드립니다.

주의 사항 : FPV 모듈에 전원을 넣기 전, 반드시 안테나 장착 후 전원을 연결 하시기 바랍니다.

안테나를 연결하지 않고 전원을 넣을 경우 과열로 모듈 파손이 되며 수리가 되지 않을 수도 있습니다.

연결 배선도는 아래를 참고 하세요.

<제품 이미지>

Product Description:
TAROT independent development of the 32 frequency.

1000mw 5.8G Video transmission system having a super mini size and light weight form factor,

using 6061T6 aluminum alloy case for heat dissipation, especially for small-scale multi-axis

rotary wing aircraft as well as the current through the machine.

32 conventional frequency compatible frequency, provides one video signal, 2-way audio signal

long-distance transmission, in addition to providing 5V1A power output

(can be used for image overlays, video cameras supply.

Please confirm the voltage and current to prevent burn-related equipment)

that emits end weight 30.9g only (without antenna)

Transmitter detailed parameters: Specifications:
1, NW 30.9g (without Antenna) Weight: 30.9g (without antenna)
2, size 50.3 × 30 × 15mm Dimension: 50.3 × 30 × 15mm
3, transmission frequency: 5645-5945MHZ / Working Frequency: 5645-5945MHz
4, number of channels: 4 bands, a total of 32 channels Channel: 4 bands / 32 channel
5, channel selection: 5 mini-DIP switch 5-DIP switch
6, transmit power: 30.5dbm (1000mw) Output Power: 30.5dbm (1000mw)
7, the input voltage: 7-26V DC (2-6S) Input Voltage: DC 7-26V (2-6S)
8, the output voltage: 5V 1A / Output Voltage: 5V 1A
9, antenna interface: RP-SMA <external thread + needle> 50Ω / Antenna Adaptor: RP-SMA 50Ω
10, the working environment temperature: -10 to 60 degrees Celsius. Working Temperature: -10 ~ 60 degrees.
11, the modulation type: FM Frequency: FM

Precautions:
1, install the antenna, and then power. Avoid equipment failure
2, select the appropriate operating frequency and the received set to the same frequency. See frequency table
3, the transmitter power is larger, do not touch the housing to avoid burns while working. Hot housing is a normal phenomenon, ease of use.
4, the input voltage is 7-26V (2-6S), do not exceed the voltage range.
5, the output current and voltage of 5V 1A, please note that the camera is within the range of voltage and current.
Note:
1, Install the antenna before connecting the power to avoid further damage.
2, Choose proper working frequency and tune the receiver to the same frequency. Please refer to the channel list.
3, Do not touch the surface of transmitter while operating. It is normal the surface is getting hot.
4, The input voltage range is between 7-26V (2-6S), do not overload the working voltage.
5, The output voltage is 5V1A. Please confirm the current and voltage of the camera

Specifications:
Tarot 5.8G FPV AV transmitter × 1
7P color strip line × 1
5.8G transmitting antenna × 1
Manual × 1